Marantec Comfort 260 Motor Head & Rail Kit

Marantec Remote Operator Comfort 260 Motor Head & Rail Kit


Marantec Comfort 260 Operator system for For lightweight doors garage doors



Comfort 260 is suitable for doors weighing up to 90 kg, up-and-over doors, retractable up-and-over doors and canopy doors with a width of up to 3.5 metres, single-walled sectional doors spanning up to 5.0 metres, and double-walled sectional doors spanning up to 3.0 metres.
Operator system for garage doors domestic use



For up-and-over doors up to a door width of 3500 mm and a door weight of 90 Kg


For single-skinned sectional doors up to a door width of 5000 mm and a door weight of 90 Kg


For double-skinned sectional doors up to a door width of 3000 mm and a door weight of 90 Kg


For retractable up-and-over doors and canopy doors up to a door width of 3500 mm, a door height of 2250 mm and a door weight of 90 Kg


For maximum 50 complete open / close functions per day 100 one way operations per day (corresponding to class 2 of the RAL quality mark)


For operator rails with roller chains, ball rope or toothed drive belts
LED light output 40W
Comes complete with 2 x handsets (868MHz)
Universal Mounting Kit for up and over doors and sectional doors



Electrical details
Nominal voltage 230 V
Nominal frequency 50 Hz
Power consumption 1,1 A
Power input in operation 0,25 KW
Power input stand-by 1,7 W
Operation mode (duty cycle) KB 2 min.
Control voltage 24 V DC
Protection category motor unit IP 20
Protection class II



Mechanical details
Push and pull force 1000 N
Door travel speed 160 mm/sec.
Opening time (door-specific) approx. 18 sec.


General details
Measurements (Motor unit) 220 x 125 x 395 mm
Weight 4,2 kg
Range of temperature -20°C to +60°C
Illuminant LED (extendable) 40 / 80 W


Functions
Economy mode
Reference point technique
Electronic travel cut-out
Soft start/soft stop
Push-open security
Anti-blocking device
Excess travel stop
Release from inside
Connection for pushbuttons, code keypads and key switches
Automatic cut-out `Open` and `Close` separately programmable
Partial opening programmable
Door travel speed `Open` and `Close` separately programmable
Soft run position `Open` and `Close` separately programmable
Soft run travel speed `Open` and `Close` separately programmable
3 minutes light programmable for lighting the garage
Automatic timer function
Connection potential-free limit switch information


Retrofitting of potential-free signal relay possible for;
Signal light
Wiping impluse
3 minutes light
Final position message
Alarm system
Malfunction message
Error message
Reset function


A one-piece SZ11 STANDARD Beltdrive rail
Measurements (L) 3080 mm
Length of travel 2475 mm
Packing length 3140 mm




Fitting Instructions & Technical Data




Marantec Remote Operator Comfort 260 Motor Head & Rail Kit