Came Top Remote Control TOP 432 EE NA EV 433.92 Gate Barrier Door Key Fob Opener Transmitters
CAME TOP432EE remote control exists in two colours: grey and black which are perfectly identical and compatible models, only the colour of the casing differs.
Came with the reference TOP432 EE is a 2-button gate transmitter that uses the frequency 433.92 MHz.
Product description and Properties
The original TOP432EE remote control will allow you to control easily and remotely your engines!
It stands out for its aesthetic appeal because its case has an elegant shape thanks to its rounded lines.
This gate beep is programmed from an already-programmed CAME remote control, TOP series.
This is called self-learning programming. With only two buttons, the Came TOP 432EE remote control is very easy to use and to handle!
Important information
Note: This gate transmitter replaces the model CAME TOP 432 EV and its the most used model of the brand.
This remote is available in 4 buttons version, its the model CAME TOP434 EE
NOTE:
This portal remote control uses the frequency 433.92 MHz, in perfect compatibility with all radio receivers of the
TOP series and has a self-learning function with the same programming procedure as TOP 432NA et TOP 432EV.
ATTENTION:
CAME TOP432EE (frequency 433.92 MHz) is not compatible with CAME TOP862EV (frequency 868.35 MHz).
Came TOP 432EE gate opener can copy the code of your old remote control of the same manufacturer and operates without any problem on your motorization system.
We explain below how it works!
What do you need to know about this remote control?
The remote controls operation
CAME RE432 receiver is ideal for this garage door transmitter.
The programming of the 2 channel remote control is quite simple, you only need an old transmitter or an already programmed one.
CAME TOP 432 EE remote control replaces the following Came gate remotes:
CAME TOP 432A
CAME TOP 432A GREY
CAME TOP432EV
CAME TOP432M
CAME TOP432MA
CAME TOP432NA
If you do not possess an already-programmed transmitter, it is possible to register the new CAME TOP432EE bi-channel remote control directly in the receiver.
The remote control needs a CR2016X2 battery as power supply.
It uses FIXED digital coding with 4090 combinations.
The range is much higher, 100m outside and 35m inside, test about 50m from the barrier in front of a small obstacle and still works very well!
The remote control uses 2 channels and allows the use of 2 gate and garage door automation.
Good to know
To secure the entrance of your property at any time, you must use a perfectly functional gate beep.
If there is any malfunction, it is necessary to replace the Came remote control.
Finding a model compatible with your gate automation is often complicated.
However, the self-learning function can simplify things.
A gate opener with this option is actually able to copy the commands from the current transmitter.
This, of course, involves a programming step.
Ergonomics
The Came TOP 432EE remote control is only 68 mm long, 32 mm wide and 12 mm thick, so it is quite small and can fit perfectly in the hand.
Its transport is so easy. You can hang this garage door opener on your key ring so you dont lose it.
You can also put the transmitter in your purse or pocket.
This remote control has two buttons, grey or black, depending on the colour of the remote control.
The construction of this new CAME portal transmitter is more robust than the old model and promises remarkable resistance and longer life thanks to its new polycarbonate casing.
How to program CAME TOP432EE remote control?
Important steps of the programming
1. Programming from an already programmed remote control:
Simultaneously press the two upper buttons on your new remote control until the LED flashes faster.
Then, press the button you wish to program until the LED lights up fixed.
Within ten seconds of the last operation, press the button on your old transmitter and hold it down.
When the keyfob flashes 3 times, it means that the programming is successful!
2. Programming from the receiver:
Open the receiver box located next to your motorization.
Locate the programming button and press the button on your new transmitter and the button on your receiver simultaneously.
Release the buttons, your remote control is well programmed!
Came Top Remote Control TOP 432 EE NA EV 433.92 Gate Barrier Door Key Fob Opener Transmitter